USB Strong Light Outdoor Headlight- Sensor Headlight

Product Description:

Style 1: Data cable + color box (no induction)

Style 2: Built-in battery + USB cable (no induction)

Style 3: Black silicone running headlight + data cable + color box (sensor type)

Style 4: Three-light source running light + data cable + color box (no induction)

Style 5: Dry battery + color box (no induction) 

XPE 120 lumens 3 watts COB 350 lumens 5 watts

Touch switch: strong light -> medium light -> long press and fast flashing, sensor switch

Battery type: polymer lithium battery 1200mah

Product folded size: 55*35*100mm

Product opening size; 300*32*20

Working voltage: 3.0V-4.5V

Waterproof rating: IPX6 (not soaked in water)

Body material: silica gel Charging time: 2.5 hours Discharge 3-8 hours

Battery capacity: 1200mAH

Product accessories: lamp, silicone strap, charging cable, neutral color box

(First gear) COB highlight: 350 lumens, lighting time 2.5~3H

(Second gear) COB low light: 130 lumens, lighting time 3.5~4H

(Third gear) XPE highlight: 120 lumens, lighting time 4~4.5H

(Four gears) XPE low light: 50 lumens, lighting time 6*6.5H 

Feel the power of technology

Three-speed push switch:

Night exercise        Caving adventure            Outdoor climbing

Circuit board instructions

1. Special reminder:

A. Do not use overvoltage, and the voltage should not exceed 4.2V

B. The positive pole of the battery is facing forward, do not reverse it, otherwise it will cause a short circuit

C. Non-professionals do not open the circuit board

2. Instructions for the use of flashlights (headlights)

1. When the flashlight (headlight) is in use, select the corresponding battery according to the voltage and battery requirements of the flashlight (headlight). Do not use it indiscriminately to prevent burnout of the circuit board. Do not use batteries of different models and voltages at the same time.

2. In use, when the brightness of the flashlight (headlight) is significantly dimmed, the flashlight (headlight) needs to be charged.

3. Troubleshooting

1. Check the battery: make sure that the battery is powered and install the battery in the correct direction. Do not use batteries of different brands, and do not mix old and new batteries.

2. Check the tail cover: make sure that the switch has been tightened and the contact is good. Ensure that the copper pillar of the tail cover is in good contact with the metal sheet of the tail cover pressing ring. Pay attention to whether the flashlight (headlight) is loose.